FAQ: What General Purpose Microprocessor is Ideal for HMI Development

Dec. 7, 2021

Learn the benefits of selecting the right component to enhance and accelerate your designs.

The most widely used components for consumer and industrial designs are general purpose microprocessors that allow for a range of important capabilities, such as high speed and on-chip cache memory. This FAQ will also discuss the common operating system to use with these components.

Continue Reading

Solving the contact resistance challenge for 7nm and beyond CMOS

Flash Memory Takes Over

A Deep Dive into Audio Jack Switches and Configurations

The audio jack is an industry-standard connector that has many potential uses in addition to providing basic audio connectivity.

What is the Most Effective Way to Commutate a BLDC Motor?

Brushless direct current electric motors, or BLDC motors for short, are electronically commutated motors powered by a dc electric source via an external motor controller. Unlike...

MEMS versus ECM: Comparing Microphone Technologies

Increasing numbers of devices utilize microphones to capture sound. Two of the most commonly used microphone technologies are MEMS and ECM.

A Designer's Guide to Lithium (Li-ion) Battery Charging

This designer's guide helps you discover how you can safely and rapidly charge lithium (LI-ion) batteries to 20%-70% capacity in about 20-30 minutes.