FAQ: Implementing BLDC Motors for Energy-Efficient Applications

July 23, 2021

Learn about some of the primary applications using BLDC motors as well as how best to implement them.

With the trend toward using brushless DC (BLDC) motors for a wide variety of products, the need for a compact and easy to apply motor driver becomes important. This FAQ covers what to do about the complexities of implementing BLDC motors as well as using a single component for your driver and what benefits and features users can expect from doing so.

Continue Reading

Solving the contact resistance challenge for 7nm and beyond CMOS

Flash Memory Takes Over

A Deep Dive into Audio Jack Switches and Configurations

The audio jack is an industry-standard connector that has many potential uses in addition to providing basic audio connectivity.

What is the Most Effective Way to Commutate a BLDC Motor?

Brushless direct current electric motors, or BLDC motors for short, are electronically commutated motors powered by a dc electric source via an external motor controller. Unlike...

MEMS versus ECM: Comparing Microphone Technologies

Increasing numbers of devices utilize microphones to capture sound. Two of the most commonly used microphone technologies are MEMS and ECM.

A Designer's Guide to Lithium (Li-ion) Battery Charging

This designer's guide helps you discover how you can safely and rapidly charge lithium (LI-ion) batteries to 20%-70% capacity in about 20-30 minutes.