Easy-To-Build AC Power Meter

May 12, 2003
Use a current transformer to build an easily-constructed ac-power meter.

If your goal is to save on electricity, you must first measure the ac current flowing through your appliances. The formula for power is the product of the ac line voltage and the measured current. Presented here is a demonstration of how to build an ac power meter using a current transformer (see the figure).

The current transformer is similar to an ordinary voltage transformer, except that a primary wire is generally absent around the core. The primary coil is constructed by winding either one of the wires connecting an ac plug and an outlet around the core (two turns, in this case).

Current ratio flowing through the primary and secondary wires is inversely proportional to the turns ratio of the transformer. The secondary ac current is rectified and smoothed by D1 and C. The R1 and R2 shunt resistors yield a correct full scale for the meter. You may need to combine a few standard value resistors to create the odd-valued R1 and R2. D2 is used to bypass the opposite-phase current.

The transformer may be broken if the secondary circuit is open with a high current on the primary wire. Of course, a voltage transformer doesn't fire when the secondary is short-circuited.

Sponsored Recommendations

Board-Mount DC/DC Converters in Medical Applications

March 27, 2024
AC/DC or board-mount DC/DC converters provide power for medical devices. This article explains why isolation might be needed and which safety standards apply.

Use Rugged Multiband Antennas to Solve the Mobile Connectivity Challenge

March 27, 2024
Selecting and using antennas for mobile applications requires attention to electrical, mechanical, and environmental characteristics: TE modules can help.

Out-of-the-box Cellular and Wi-Fi connectivity with AWS IoT ExpressLink

March 27, 2024
This demo shows how to enroll LTE-M and Wi-Fi evaluation boards with AWS IoT Core, set up a Connected Health Solution as well as AWS AT commands and AWS IoT ExpressLink security...

How to Quickly Leverage Bluetooth AoA and AoD for Indoor Logistics Tracking

March 27, 2024
Real-time asset tracking is an important aspect of Industry 4.0. Various technologies are available for deploying Real-Time Location.

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!