Skip navigation
Power Electronics
Low Pin Count N-FET Pre-Driver Targets Automotive High Current DC Motor Applications

Low Pin Count N-FET Pre-Driver Targets Automotive High Current DC Motor Applications

Melexis introduces the MLX83100 N-FET pre-driver IC. Offered in a compact 28-pin package, with four digital inputs, this pre-driver IC provides a very flexible, inexpensive and space-saving solution for high current N-FET DC motors.

The MLX83100 has the capability to simultaneously drive four 500nC-rated N-FETs at up to 28V operating voltage with minimal self-heating. The device supports 45V automotive load dump conditions. An integrated bootstrap function and charge pump allow for support of supply voltages down to 4.5V, ensuring continuous operation under automotive crank conditions. The device thereby supports 100% pulse width modulated (PWM) operation. Its built-in EEPROM memory provides end-of-line (EoL) configurability, so that the customer can configure the device to their specific system design requirements. The MLX83100 also comprises a current shunt amplifier, with a high gain bandwidth, delivering a fast settling time with high accuracy. This makes these pre-drivers highly suitable for precise torque control applications, like electrical power steering.

 The MLX83100 is fully automotive qualified and has an operational temperature range spanning from -40°C to +150°C. Full diagnostics is provided via a single serial communication line, thereby distinguishing different error types. All output voltages are for example monitored for failure conditions. In addition, input battery under-voltage, over-voltage and over-temperature protection is incorporated.

TAGS: Products
Hide comments


  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.