Electronicdesign 28113 Image001 0

500-W DC-DC Converters Target EV Apps

Aug. 2, 2019
Green Watt Power’s EVD500 series has a constant-current function, allowing it to connect directly to a battery load.

Green Watt Power recently announced the EVD500 series of fully encapsulated, ruggedized dc-dc converters for electric-vehicle (EV) applications. The EVD500 has two input ranges, 30 to 65 V dc and 50 to 130 V dc, with output voltages of 13.5, 14.2, or 27.5 V dc to power auxiliary EV functions such as lights, instruments, accessories, and so forth. In addition, unlike most dc-dc converters in the EV market, the EVD500 has a constant current function, which allows it to connect directly to a battery load, claims the company.

According to Green Watt Power, the EVD500 has superior low battery conservation with a quiescent current draw of less than 30 µA. It features fully isolated input to output and is protected by overvoltage protection, short-circuit protection, input reverse-polarity protection, and overtemperature protection.

Efficiencies for the EVD500 run as high as 93%, and the unit contains a metal baseplate for heat transfer to a metal mounting surface, says the company. All models are housed in an IP66 enclosure for protection against water intrusion.

The EVD500 provides a cost-effective solution for higher power requirements. Multiple EVD500 converters can be wired in parallel with no external circuitry required to obtain up to 5000 W. All models feature remote on/off and are ROHS compliant. Line and load regulation for the EVD500 is 1% and 7% respectively. Output ripple and noise is 100 mV peak-to-peak typical. Load transient response is 10 ms, while startup and rise time is 500 ms. The operating ambient temperature range of the EVD500 is -40 to +75°C.

The MTBF per MIL-HDBK-217F at 25°C ground benign is 150,000 hours. The case size is 7.48 x 2.99 x 1.71 inches (190.0 x 76.0 x 43.5 mm). The weight of the EVD500 is 1.25 kg.

The EVD500 can withstand 8 Gs in x, y, and z axis from 0 to 200 Hz for one minute. It's designed to meet IEC, UL, and CSA requirements with EMC emission: EN12895, EN55022; EMC immunity: EN12895, and ESD: EN12895 (±4 kV-contact, ±15 kV-air).

Units are available from stock up to eight weeks. For more information on the EVD500, visit here.

Sponsored Recommendations

TTI Transportation Resource Center

April 8, 2024
From sensors to vehicle electrification, from design to production, on-board and off-board a TTI Transportation Specialist will help you keep moving into the future. TTI has been...

Cornell Dubilier: Push EV Charging to Higher Productivity and Lower Recharge Times

April 8, 2024
Optimized for high efficiency power inverter/converter level 3 EV charging systems, CDE capacitors offer high capacitance values, low inductance (< 5 nH), high ripple current ...

TTI Hybrid & Electric Vehicles Line Card

April 8, 2024
Components for Infrastructure, Connectivity and On-board Systems TTI stocks the premier electrical components that hybrid and electric vehicle manufacturers and suppliers need...

Bourns: Automotive-Grade Components for the Rough Road Ahead

April 8, 2024
The electronics needed for transportation today is getting increasingly more demanding and sophisticated, requiring not only high quality components but those that interface well...

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!