Power Electronics
Electronic Load Carries 300 W

Electronic Load Carries 300 W

The EL9712B 300W electronic load from INTEPROSYSTEMS has an input rating of 0 to 15 A and 0 to 500 V.

Any current carrying component (e.g. connectors and terminals) may be tested and a wide range of dynamic load conditions may be simulated including solar cell and fuel cell loading, LED testing and battery discharge profiles.

The new EL9712B electronic load offers 6 modes of operation (CC, CR, CV, CC+CV, CR+CV) with fast rise-times and features dual range 16-bit resolution measurements with the accuracy of a digital multi-meter and the convenience of a single connection. The loads are fully protected against OP, OC, OV, OT and reverse polarity ensuring operational reliability and protection for the device under test. Special features include 999 measurements/hour, constant current mode soft-start, dynamic pulsing and programmable duty cycles.

The simple to use digital front-panel offers full manual control and remote control of the EL9712B electronic load is available via USB connection.  The EL9712B electronic load has been designed for easy integration into larger automated systems and may be controlled by INTEPRO's open-source PowerStar software suite.

 

TAGS: Products
Hide comments

Comments

  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Publish