Power Electronics

Hydrocarbon Membranes Ease Manufacturing of Micro Fuel Cells

PolyFuel, a developer of engineered membranes for fuel cells, recently announced a new version of its hydrocarbon membrane for portable applications. The new version provides fuel cell manufacturers with the best-in-class performance attributes of its predecessor, while at the same time providing significantly greater manufacturing flexibility. This is the first hydrocarbon fuel cell membrane that is a “drop-in” replacement for fluorocarbon membranes, such as DuPont’s Nafion in existing fuel cell membrane electrode assembly (MEA) manufacturing processes.

“Widespread adoption of fuel cells and their long-term commercial viability, depends heavily on their rate of adoption in the power-hungry portable market, said Jim Balcom, PolyFuel’s president and CEO. “Of the several critical problems to be solved, manufacturability remains high on the list. This introduction addresses that issue for the new generation of high-performing hydrocarbon fuel cell membranes.”

While not yet commercially available, portable fuel cells are the subject of increasingly widespread research and development activity, with huge investments being made by a significant number of companies. Almost all of that investment has revolved around fuel cell membranes based upon fluorocarbon technology, pioneered by DuPont with the development of their Nafion material in the 1960s, which, although not able to deliver the performance required for commercially viable portable fuel cells, has, historically speaking, been the only game in town.

A year ago, PolyFuel announced the first commercial hydrocarbon-based membrane for portable direct methanol fuel cells (DMFCs). Balcom explained that hydrocarbon membranes offer several substantive advantages over fluorocarbon membranes, particularly in reducing the size, weight and cost, as well as increasing the runtime of portable fuel cell systems. However, until today, they also have typically required different approaches in manufacturing than those used to fabricate fuel cells from fluorocarbon membranes. “With PolyFuel’s new membrane, that is no longer the case,” Balcom said. “Fuel cell manufacturers can now utilize our new membrane as a drop-in replacement for Nafion or other fluorocarbon membranes in their existing MEA fabrication processes.”

Fuel cell membranes0151;which resemble sheets of cellophane—are literally the heart of a fuel cell. As a result of their uniquely-engineered structure and chemical composition, they are able to produce electricity by stripping electrons from fuel molecules. The only byproduct is water, and for portable fuel cells that use methanol as a fuel, carbon dioxide.

During the manufacture of such a cell, a multi-layer sandwich of membrane and other materials—called an MEA, for “membrane-electrode assembly”—must be fabricated. The MEA acts as a rigid barrier inside the fuel cell, separating the wet fuel on one side and the air on the other, while simultaneously keeping the membrane in contact with both. An MEA in a fuel cell intended for a cell phone would be the size of a business card, and about as thick as a credit card.

Because of the innate plastic characteristics of Nafion and other fluorocarbon membranes, they soften at relatively low temperatures, which has allowed the development of MEA fabrication techniques where the membrane is “hot bonded” to the adjacent components. Hydrocarbon membranes, which are typically stronger and more durable, have not lent themselves to this technique, as they don’t soften at the same low temperatures as fluorocarbon membranes. PolyFuel’s new “hot-bondable” membrane, however, permits manufacturers to effectively “drop in” the more desirable hydrocarbon membrane into fabrication processes originally designed for Nafion.

PolyFuel’s original breakthrough hydrocarbon membrane and this new hot-bondable version have been engineered specifically for portable fuel cell applications. The hydrocarbon polymer is designed to be uniquely durable in the presence of methanol, the most popular fuel for portable (micro) fuel cells. Additionally, the membrane properties have been optimized for high performance and high fuel efficiency. This allows portable fuel cell manufacturers to design fuel cell systems that are smaller, lighter and less expensive—while at the same time being more robust and delivering longer runtimes—compared to systems incorporating conventional fluorocarbon materials, such as Nafion.

The hot-bondable version results from a proprietary surface modification. With this modification, the membrane behaves in a fashion similar to Nafion during the bonding or MEA fabrication process, while still retaining the underlying advantages of the original PolyFuel hydrocarbon membrane.

For more information, visit www.polyfuel.com.

Hide comments

Comments

  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Publish