Power Electronics

Baltimore Welcomes PowerSystems World

After several years away, PowerSystems World returns to the East Coast and the site of the very successful PowerSystems World in 1997, Baltimore, Maryland. The Mid-Atlantic region boasts a critical mass of major manufacturing and technology companies, making it an excellent location for you to network with colleagues, meet with manufacturers and suppliers, and learn from leading industry authorities.

If you would benefit by seeing, trying and pricing the latest power electronics components and equipment, learning from leading authorities, and networking with peers and real leaders in the field, then you should attend the Power Electronics Technology Exhibition & Conference, October 25-27 at the Baltimore Convention Center.

Must-Attend Conference

This year's conference program will offer in-depth technical sessions on a broad array of topics and includes new sessions on emerging technologies, innovative new products and medical-grade converters. Power Electronics Technology Editorial Director Ashok Bindra and Editor David Morrison directed the content for this year's conference, so you can be sure it will be timely, leading edge and very informative. The conference includes information-packed, one-hour seminars, Professional Advancement Courses, technical paper presentations and several free sessions. See the conference schedule on the opposite page for presentations and times.

Exhibit Hall

Walk the Power Electronics Technology exhibit hall and meet with suppliers who have come to answer your power electronics questions and offer solutions to your challenges. There's no better way to make a product or supplier recommendation than meeting with vendors and inspecting, testing and pricing their products.

Products on display in the exhibit hall include: analog, mixed-signal and digital ICs; batteries and battery products; high-voltage products; magnetics products; passive components; power component and power supply manufacturing equipment; power systems for RF/microwave equipment; sensors and transducers; test instruments and measurement systems; thermal management products; design software (CAD/CAE); and hardware/interconnects.

Poster Sessions

This year, a large number of excellent papers were submitted for presentation at the conference; unfortunately, we were not able to include all of them. But because we believe many of them merit your consideration, we've invited the authors to present their papers as Poster Sessions in the exhibit hall on Wednesday, October 26 from 11:30 a.m. to 12:30 p.m.

Keynote Speakers

On Tuesday, October 25 from 9:45 a.m. to 10:45 a.m., Dr. Scott D. Strand, program director of Power/Cooling Procurement Engineering for IBM Corp., will present his keynote address, “Future Power Technology in the Global Marketplace — A Customer Perspective.”

IBM has been working within all areas of the power supply community to foster an awareness of these critical challenges. In this address, Strand will discuss how IBM drives technology to meet our ever-changing needs as well as a different paradigm in how we approach our business in the power industry. He will then discuss some of the areas in which IBM has been changing its approaches and processes for acquisition and delivery of power systems. There will be a high-level view of IBM's unique requirements and how it is working with the industry to provide solutions.

High Voltage Pavilion

If you buy, use or specify high-voltage products and equipment, be sure to check out the High Voltage Pavilion, a special area on the show floor designated for manufacturers of high-voltage equipment. You'll find products, services and solutions that can help you meet your high-voltage requirements.

FREE FOR ALL ATTENDEES

RoHS the Tip of the Environmental Compliance Iceberg

Ken Stanvik, Design Chain Associates, Wednesday, October 26, 9:45 am-10:45 am

The European Union has implemented into law the Restrictions on the use of certain Hazardous Substances Directive, or RoHS. The Directive restricts the use of certain heavy metals and flame-retardants in electrical and electronic equipment, and provides exemptions for specific materials and applications in the absence of viable alternatives. Products imported into or manufactured in the EU and offered for sale after July 1, 2006, must comply. Today's current directive is only the tip of the environmental compliance iceberg. It's not what you know but what you don't know that can sink your corporate ship. Learn more about other legislation within the EU and across the globe that will have major impacts on your product design, product lifecycle, component suppliers, manufacturing and customers.

PROFESSIONAL ADVANCEMENT COURSES
SUNDAY, October 23
PAC01 9 a.m. to 5 p.m. Basics of AC/DC Motor Drives and Servo Systems Design Dr. Dal Ohm, Drivetech Inc.
PAC02 9 a.m. to 5 p.m. Switchmode Design and Layout Techniques for Low EMI Bruce Carsten, Bruce Carsten Associates Inc.
PAC03 9 a.m. to 1 p.m. Power Conversion Reliability Don Gerstle, C&D Technologies Inc.
PAC04 9 a.m. to 1 p.m. Advanced Topics on Single-Phase Power Factor Correction Dr. Jian Sun, Rensslaer Polytechnic Institute
PAC05 2 p.m. to 6 p.m. Understanding Digital Power Control David Caldwell, Flextek Electronics
PAC06 2 p.m. to 6 p.m. Designing Power Conditioning Systems for Fuel Cells Dr. Prasad Enjeti, Texas A&M University
PAC07 2 p.m. to 6 p.m. Technical Marketing in the Electronics Era Greg Evans, Welcomm Inc.
MONDAY, October 24
PAC08 9 a.m. to 5 p.m. Design Criteria for Low Power Motor Drive System — Advanced Motor Types, Converters & Optimized Semiconductors Dr. Leo Lorenz, Infineon Technologies
PAC09 9 a.m. to 5 p.m. Design Considerations for High Frequency Linear Magnetics Bruce Carsten, Bruce Carsten Associates Inc.
PAC10 9 a.m. to 5 p.m. Advanced Materials for Power Electronics Thermal Management & Packaging Dr. Carl Zweben, Industry Consultant
PAC11 9 a.m. to 1 p.m. IGBT Module Selection for Design Engineers John Donlon, Powerex Inc.
PAC12 2 p.m. to 6 p.m. PMBus Implementers Forum Ken Fernald, Zilker Labs Inc.
CONFERENCE AT A GLANCE
TUESDAY, October 25
PES01 8:30 a.m. to 9:30 a.m. From Power Supply to Power System Ronald Lenk, Tyco Electronics
PES02 8:30 a.m. to 9:30 a.m. Lithium Ion & Lithium Polymer: What Cell Chemistry is Right for Your Battery System? Jeffrey VanZwol, Micro Power Electronics Inc.
PES03 8:30 a.m. to 9:30 a.m. Modeling & Design of n+1 Current Share & Hot Swap as Disturbance Rejection for DC-DC Converters Isaac Ozkaynak, Power Supply Consultants
PES04 8:30 a.m. to 9:30 a.m. Compensating Digital PWM Control Loops Phillip McKenzie, Zilker Labs Inc.
9:45 a.m. to 10:45 a.m. Free Keynote Address: Future Power Technology in the Global Marketplace — A Customer Perspective Dr. Scott D. Strand, Program Director, Power/ Cooling Procurement Engineering, IBM
11 a.m. Exhibit Hall Opens
PET01 1:30 p.m. to 3:30 p.m. Magnetics - Materials & Design Chair: Augie Sisco, IMA lnternational Magnetics Assoc.
PET02 1:30 p.m. to 3:30 p.m. Emerging Technologies Chair: Kevin Parmenter, Fairchild Semiconductor
PET03 1:30 p.m. to 3:30 p.m. Discrete Power Semiconductors Chair: Alan Elbanhawy, Fairchild Semiconductor
PET04 1:30 p.m. to 3:30 p.m. Power Supply Design & Power Management Chair: Paul Greenland, National Semiconductor
PET05 1:30 p.m. to 3:30 p.m. Inverters Chair: Eric Persson, International Rectifier
3:30 p.m. to 5 p.m. Reception on Show Floor
WEDNESDAY, October 26
PES05 8:30 a.m. to 9:30 a.m. Making Low Level AC Standby Power Measurements Kevin Parmenter, Fairchild Semiconductor
PES06 8:30 a.m. to 9:30 a.m. Multi-Output Converter Performance with Imperfect Coupling in the Transformer and in the Output Choke Brian Lees, Power Plus Electronics Ltd.
PES07 8:30 a.m. to 9:30 a.m. Improved Transformer Design Using Loss and Energy Density Functions Victor Quinn, Tabtronics Inc.
PES08 8:30 a.m. to 9:30 a.m. A Versatile Monolithic Digital PWM Controller Don Alfano, Silicon Laboratories Inc.
9:45 a.m. to 10:45 a.m. GES: RoHS the Tip of the Environmental Compliance Iceberg Kenneth Stanvick, Design Chain Associates
11 a.m. Exhibit Hall Opens
11:30 a.m. to 12:30 p.m. Poster Papers on Show Floor
PET06 1:30 p.m. to 3:30 p.m. Automotive Applications Chair: Joseph Notaro, STMicroelectronics
PET07 1:30 p.m. to 3:30 p.m. Thermal Management & Packaging Chair: Chris Soule, Thermshield LLC
PET08 1:30 p.m. to 3:30 p.m. Innovative New Products Chair: Lou Pechi, Power-One
PET09 1:30 p.m. to 3:30 p.m. Circuit Protection Technologies Chair: Bruce Carsten, Bruce Carsten Associates Inc.
PET10 1:30 p.m. to 3:30 p.m. Battery and Portable Power Management Chair: Jeffrey VanZwol, Micro Power Electronics Inc.
THURSDAY, October 27
9 a.m. Exhibit Hall Opens
PET11 12:30 p.m. to 2:30 p.m. Power Components I Chair: Thomas Hopkins, STMicroelectronics
PET12 12:30 p.m. to 2:30 p.m. Power Modules Chair: Greg Evans, Welcomm Inc.
PET13 12:30 p.m. to 2:30 p.m. Motor Drive Design Chair: Howard Abramowitz, AirCare Automation Inc.
PET14 12:30 p.m. to 2:30 p.m. EMI/EMC Chair: Ronald Lenk, Tyco Electronics
PET15 2:45 p.m. to 4:45 p.m. DC-DC Converters Chair: David Morrison, Power Electronics Technology
PET16 2:45 p.m. to 4:45 p.m. PFC & Lighting Chair: Thomas Ribarich, International Rectifier
PET17 2:45 p.m. to 4:45 p.m. Medical Grade Converters Chair: Bruce Carsten, Bruce Carsten Associates Inc.
PET18 2:45 p.m. to 4:45 p.m. Control Methods Chair: Ashok Bindra, Power Electronics Technology
PET19 2:45 p.m. to 4:45 p.m. Power Components II Chair: Peter Blais, KEMET Electronics Corp.


PowerSystems World Exhibitor List

ABB Semiconductors Inc. 908
Actown Electrocoil Inc. 1422
Advanced Magnetic Solutions 818
Advanced Materials Technologies 739
American Superconductor 733
Ametherm Inc. 1224
Ansoft Corp. 1111
AOS Thermal Compounds 1416
Applied Power Systems Inc. 1419
ASC Capacitors 1316
ASIC Advantage Inc. 715
AVX Corp. 922
Bergquist Company, The 941
CDM Electronics 1030
Central Semiconductor Corp. 1036
Ceramic Magnetics / Iskra Feriti 1009
CET Technology 737
Chroma Systems Solutions Inc. 1228
Coilcraft Inc. 1214
Cornell Dubilier 1114
Cramer Coil & Transformer Inc. 1028
Cree Inc. 1323
Danfoss Silicon Power GmbH 832
Datatronics 1414
DAU Thermal Solutions Inc. 1115
Dearborn Electronics Inc. 1432
EBG Resistors 1117
Eldre Corp. 809
Electro Technik Industries 923
Electrocube Inc. 1029
Electronic Component News (ECN) 1238
Electronic Concepts Inc. 815
Electronic Design/EE Product News 641
Enerpro 1333
ERM Thermal Technologies Inc. 1232
eupec Inc. 709
Ferroxcube USA 1018
Freescale Semiconductor 1108
Fuji Semiconductor Inc. 909
Fujipoly America Corp. 823
Gaia Converter Inc. 639
GMW Associates 836
Gowanda Electronics 1415
GrafTech International Ltd. 938
Henkel Corp. 1319
High Voltage Power Systems Inc. 1116
Hitachi AIC Inc. 1223
Holystone Enterprise Co. Ltd. 1131
HV Components / CKE 1119
HVR Advanced Power Components 917
Inductors Inc. 1215
Infineon Technologies 916
ITW Paktron 1124
IXYS Corp. 715
Kunze Heatmanagement 715
Kanthal Globar 1222
Kaschke USA Inc. 1324
Kemet Corp. 1110
Kestar Electronic (China) Co. Ltd. 740
LeCroy Corp. 1210
LEM U.S.A. Inc. 924
Littelfuse 736
Lodestone Pacific 1233
Lytron Inc. 833
Magnetics 829
MCB Tech 1137
Methode-Network Bus Products, Methode-Cableco Technologies 930
Micrometals Inc. 1236
Microspire 1424
MMG 1225
Multi-Contact USA 914
NORWE Inc. 837
NWL 1123
Ohmite Manufacturing Co. 1132
Okaya Electric America Inc. 1136
Parker - Advanced Cooling Systems 637
Payton America Inc. 1429
Pearson Electronics Inc. 1032
Peter Parts Electronics Inc. 1015
Plitron Manufacturing Inc. 1318
Positronic Industries Inc. 1417
Power Electronics Technology/EC&M 629
Power Integrations 1022
Powerex Inc. 1014
PSi Technologies 1330
RAF Technologies Inc. 1328
Renco Electronics Inc. 1423
R-Theta Thermal Solution 839
SanRex Corp 915
SB Electronics Division 1118
Semikron Inc. 1329
Sensitron Semiconductor 1128
Silicon Laboratories 1428
SLEEK Co. Ltd. 939
Solid State Devices Inc. (SSDI) 1129
Stellar Industries Corp. 825
STMicroelectronics 615
Sunrise E&E 1039
Synopsys 1109
Sypris Test & Measurement 1322
Tabtronics Inc. 936
Tamura Corp. of America 838
Teamwise Ltd. 1230
Tektronix Inc. 1315
Thermagon Inc. 1208
Thermshield LLC 1418
Tier Electronics 1218
Timtronics 1011
Toshiba America Electronic Components Inc. 723
Transtek Magnetics Inc. 841
Tribotek Inc. 928
Tyco Electronics 828
VAC Magnetics Corp. 1229
Ventronics Inc. 937
Vishay Intertechnology Inc. 929
Voltage Multipliers 1122
Wurth Electronics Inc. 1017
Yokogawa Corp. of America 1023
Zhuzhou Electric Locomotive Institute, CSR 831
Zilker Labs Inc. 940


Power Quality Exhibitor List

AEMC Instruments 315
APC-American Power Conversion 423
Association of Energy Engineers 331
Avtron Mfg. Inc. 333
Beckwith Electric Co. Inc. 428
CITEL Surge Protection 632
Cobasys 636
Copper Development Association 232
ComRent International 318
Dent Instruments 418
Dranetz-BMI 429
Electrical Contracting Products 230
Elpec North America 322
Elster Electricity 316
Fluke Corp. 337
Generac Power Systems Inc. 515
GridSense Systems Inc. 228
Hioki USA 218
Hitec Power Protection 215
Iconopower Ltd. 219
Ideal Industries Inc. 332
Measurlogic Inc. 514
Megger 329
NETA 216
Pentadyne Power Corp. 528
Phoenix Contact Inc. 328
Power Measurement 222
Power Monitors Inc. 323
Power-Savings LLC 432
Power Standards Lab 419
Power Systems & Controls Inc. 214
SAFT Power Systems 314
Satcon Power Systems 433
Satec Inc. 237
Starline Track Busway, Div. of Universal Electric Corp. 431
Summit Technology Inc. 225
Z Meters Inc. 223


PowerSystems World Exhibitor Descriptions

ABB Semiconductors Inc.
Booth 908
575 Epsilon Dr.
Pittsburgh, PA 15638
Phone: 412-967-5860 x001
Fax: 412-967-5868

ABB Semiconductors is a manufacturer of high-power IGBTs, IGCTs, GTOs, thyristors and diodes. In North America, ABB Semiconductors Inc. provides sales, technical support and distribution services for power semiconductors and current/voltage sensors.

AOS Thermal Compounds
Booth 1416
22 Meridian Road #6
Eatontown, NJ 07724
Phone: 732-389-5514
Fax: 732-389-6380
www.aosco.com

AOS Thermal Compounds manufactures a sophisticated line of thermal greases, has developed the first silicone-free and sprayable thermal greases, and has launched a line of dry-to-the-touch thermal grease films that are as easy to use as thermal pads and phase change materials, but exhibit the superior performance of actual thermal greases.

ASC Capacitors
Booth 1316
301 West O
Ogallala, NE 69153
Phone: 308-284-3611
Fax: 308-284-2708
www.ascapacitor.com

ASC Capacitors is a member of the Shizuki Electric worldwide manufacturing and services group. ASC manufactures advanced capacitive components and assemblies utilizing metallized and film-foil plastic dielectrics of polypropylene, polyester, polyphenylene sulfide, polycarbonate and other dielectrics for electronic and electrical, motor-run, ac ballast, low and high voltage, and KVAR power capacitor applications.

AVX Corp.
Booth 922
801 17th Ave. South
Myrtle Beach, SC 29578
Phone: 843-946-0291
Fax: 843-916-7765
www.avxcorp.com

Actown Electrocoil Inc.
Booth 1422
2414 Highview St.
Spring Grove, IL 60081
Phone: 815-675-6641
Fax: 815-675-2050
www.actown.com

Actown Electrocoil Inc. was formed in 1952 as a modest coil-winding house in the suburbs of Chicago. Through strategic acquisitions, partnerships and joint ventures, Actown has grown into a leading transformer and coil supplier with extensive global design, manufacturing and procurement capabilities.

Advanced Magnetic Solutions
Booth 818
1200 East 36th St.
Chattanooga, TN 37401
Phone: 423-308-1648
Fax: 423-308-1620
www.amagsolutions.com

Advanced Materials Technologies
Booth 739
3 Tuas Lane
Singapore, INT 638612
Phone: 656-863-6551
Fax: 656-863-6550
www.amt-mat.com

American Superconductor
Booth 733
Two Technology Dr.
Westborough, MA 01581
Phone: 508-621-4112
Fax: 508-621-4376
www.amsuper.com

The PM1000 PowerModule power converter family introduces a new era in power conversion. PM1000 converters can be configured to address a wide range of applications (such as ac-ac, ac-dc, dc-dc or dc-ac) and provide a platform for rapid development of high-power converters and systems giving you the ability to rapidly develop new products of your own.

Ametherm Inc.
Booth 1224
3111 N. Deer Run Road #4
Carson City, NV 89701
Phone: 775-808-2434
www.ametherm.com

Ametherm is a leader in circuit-protection thermistors, in-rush current protection and overcurrent protection.

Ansoft Corp.
Booth 1111
225 West Station Square Dr.
Pittsburgh, PA 15219
Phone: 412-261-3200
Fax: 412-471-9427
www.ansoft.com

Ansoft offers design software to meet the rigorous, interdisciplinary engineering demands of modern power designs. Ansoft offers a tightly coupled system simulation/FEA capability that is unmatched in the industry and delivers the capability you need to examine the interoperation of the power electronic circuit, electric machine and control without building prototypes.

Applied Power Systems
Booth 1419
124 Charlotte Ave.
Hicksville, NY 11801-2620
Phone: 516-935-2230
Fax: 516-935-2603
www.appliedps.com

ASIC Advantage Inc.
Booth 715
1290-B Reamwood Ave.
Sunnyvale, CA 94089
Phone: 408-541-8686
Fax: 408-541-8675
www.in-plug.com
www.asicadvantage.com

ASIC Advantage Inc. offers a family of IN-PLUG Smart Power ICs featuring flyback, feedback, PFC, push-pull and resonant controllers, for minimum cost and maximum efficiency SMPSs ranging from a few watts to ±1000 W. They can operate from any source ranging from 12 Vdc to +300 Vac and feature low component count, overload protection and high efficiency.

Bergquist Co.
Booth 941
18930 W. 78th St.
Chanhassen, MN 55317
Phone: 800-347-4572
Fax: 952-835-0430
www.bergquistcompany.com

The Bergquist Co. designs and manufactures high-performance thermal management materials used to cool electronic components. Bergquist supplies the world with some of the best-known brands in the business: Sil-Pad thermally conductive interface materials; Gap Pad electrically insulating and noninsulating gap fillers; Hi-Flow phase change grease replacement materials; and Bond-Ply thermally conductive adhesive.

CDM Electronics
Booth 1030
130 American Blvd.
Turnersville, NJ 08012
Phone: 856-740-1200
Fax: 856-740-0500
www.cdmelectronics.com

CET Technology
Booth 737
27 Roulston Road
Windham, NH 03087
Phone: 603-894-6100
Fax: 603-894-6161
www.cettech.com

Linear power transformers in EI and toroidal styles. Toroids rated up to 2.5 kVA. Switching-mode transformers up to 5000 W in various core styles. Toroidal common-mode chokes and inductors. Audio/telecom transformers in surface-mount and thru-hole styles. Wall-mount and desktop linear and switching power supplies. Most products have UL, Cul and TUV approvals.

Central Semiconductor Corp.
Booth 1036
145 Adams Ave.
Hauppauge, NY 11788-3603
Phone: 631-435-1110
Fax: 631-435-1824
www.centralsemi.com

Central Semiconductor Corp. manufactures world-class discrete semiconductors in surface-mount, leaded and chip form. Device families include: small signal transistors, bipolar power transistors, diodes, rectifiers, current-limiting diodes, thyristors and bridge rectifiers. Central will be introducing its new line of thyristors in both leaded and SMD packages.

Ceramic Magnetics/Iskra Feriti
Booth 1009
16 Law Dr.
Fairfield, NJ 07004
Phone: 973-227-4222
Fax: 973-227-6735

Full line of ferrite cores and products; prototype, custom, standard core shapes, micro-gapped toroids and injection-molded cores. Offering new low-loss ferrite. Prototypes to production, application engineering support and custom tooling are available.

Chroma Systems Solutions Inc.
Booth 1228
7 Chrysler
Irvine, CA 92618
Phone: 949-421-0355
Fax: 949-421-0353
www.chromausa.com

Chroma is a more than $180 million company and a recognized leader in power supply testing equipment. Products include automated power supply test systems, ac and dc electronic loads, programmable ac and dc power supplies, and many other related products designed for engineering evaluation, test benches and production applications.

Coilcraft Inc.
Booth 1214
1102 Silver Lake Road
Cary, IL 60013
Phone: 847-639-2361
Fax: 847-639-1469
www.coilcraft.com

Coilcraft is a worldwide manufacturer of magnetic components including high-frequency SMD power chokes (up to 100 A), transformers, current sensors, PoE magnetics and filters.

Cornell Dubilier Electronics
Booth 1114
140 Technology Place
Liberty, SC 29657
Phone: 864-843-2277
Fax: 864-843-3800
www.cde.com

Cornell Dubilier's major capacitor types are aluminum electrolytic, polyester film, polypropylene film, mica, pulse, snubber, motor-run, motor-start and high-voltage capacitors. Emphasis is on providing capacitor solutions with a high level of service. Cornell Dubilier operates from three ISO 9000 facilities in Liberty, S.C.; New Bedford, Mass.; and Mexicali, Mexico.

Cramer Coil & Transformer Inc.
Booth 1028
401 Progress Dr.
Saukville, WI 53080
Phone: 262-268-4023
Fax: 262-268-4123
www.cramerco.com

Cramer Coil & Transformer Co. is dedicated to supplying repeatable, high-quality, cost-effective magnetics solutions. Our design capabilities and safety agency expertise allow for the efficient generation of appropriate designs. Quick turn prototypes, superb customer service, and efficient global manufacturing capabilities facilitate well-organized progression from concept through production.

CREE Inc.
Booth 1323
4600 Silicon Dr.
Durham, NC 27703-8475
Phone: 919-313-5300
Fax: 919-313-5417
www.cree.com

SiC Power Diodes-Zero Recovery rectifiers for switch-mode power supply, power-factor correction, or motor-drive applications. Cree Inc. is a world leader in the development, manufacturing and marketing of electronic devices made from silicon carbide (SiC), a material superior to silicon for certain applications.

DAU Thermal Solutions Inc.
Booth 1115
460 Spruce St.
Middletown, PA 17057
Phone: 717-441-0676
Fax: 717-441-0674
www.dauusa.com

Dau Thermal Solutions Inc. manufactures custom and standard thermal solution products. Producing: heat pipes, bonded fin, extruded and liquid cooled heatsinks in copper and aluminum, while using multiple technologies in the same design.

Danfoss Silicon Power GmbH
Booth 832
Heinrich-Hertz-Strasse 2
Schleswig, Germany 24837
Phone: 49 4621 95120
Fax: 49 4621 951230
www.siliconpower.danfoss.com

Datatronic
Booth 1414
28151 Highway 74
Romoland, CA 92585
Phone: 951-928-7700
Fax: 951-928-7701
www.datatronics.com

Datatronic designs and manufactures wirewound magnetic devices for commercial, industrial, military, life support and hi-rel applications. Products include SMPS transformers and inductors, current-sense transformers, pulse transformers, wideband RF transformers, telecommunications transformers and LAN filters.

Dearborn Electronics Inc.
Booth 1432
1221 N. Hwy. 17-92
Longwood, FL 32750
Phone: 407-695-6562
Fax: 407-695-6889

Dearborn Electronics Inc. manufactures high-performance film capacitors for the aerospace, military, industrial and commercial sectors. In addition, the company produces subminiature EMI filters.

EBG Resistors
Booth 1117
460 Spruce St.
Middletown, PA 17057
Phone: 717-795-9877
Fax: 717-795-9664

EBG manufactures high-voltage (up to 60 kV), high-power (up to 600 W), noninductive thick film resistors. We offer such characteristics as very low and controlled temperature and voltage coefficients, high-stability, high-temperature operations and tight tolerances. New products include: UPT 600, MSP35, SWS-2 and also an entire new line MTX.

ECN Magazine
Booth 1238
100 Enterprise Dr., Suite 600
Rockaway, NJ 07866-0912
Phone: 973-920-7090
Fax: 973-920-7533
www.ecnmag.com

ECN magazine is the electronics market's leading source of new product, component and technology information for more than 126,000 design and development engineers and engineering managers. Each issue provides a mix of application articles, design tutorials, and product reviews rounding out the most complete information source for EOEM design professionals.

ERM Thermal Technologies Inc.
Booth 1232
6377 Dean Parkway
Ontario, NY 14519
Phone: 585-265-0330 x211
Fax: 585-265-1941
www.heatsink.com

Manufacturer and designer of heatsinks, bonded, air-cooled, liquid, extruded, staked and value-added assemblies.

Eldre Corp.
Booth 809
1500 Jefferson Road
Rochester, NY 14623
Phone: 585-427-7280
Fax: 585-272-0018
www.busbar.com

Custom power distribution solutions for any application. Laminated bus bars are engineered components consisting of layers of fabricated copper separated by thin dielectric materials, laminated into a unified structure. Sizes and applications range from surface-mounted bus bars the size of a fingertip to multilayer copper bars that exceed 20 feet.

Electrocube Inc.
Booth 1029
1307 S. Myrtle Ave.
Monrovia, CA 91016
Phone: 626-301-0122
Fax: 626-357-8099
www.electrocube.com

Electrocube manufactures electronic and power system components for commercial, industrial, medical, aerospace and military applications. Products include precision film capacitors, RC networks, snubber caps, custom EMI/RFI filters, lightweight foil transformers and Seacor capacitors. Engineering services are available to design components to fit your application.

Electronic Concepts Inc.
Booth 815
526 Industrial Way West
Eatontown, NJ 07724
Phone: 732-542-7880
Fax: 732-542-0524

Electronic Concepts designs and manufactures a comprehensive range of standard and customized film capacitors serving a broad range of electronic industry markets since 1969.

Electronic Design/EE Product News
Booth 641
45 Eisenhower Dr.
Paramus, NJ 07652
Phone: 201-845-2400
Fax: 201-845-2484

Electronic Design provides leading-edge technical information to electronics engineers around the world responsible for the design and development of electronic original equipment manufacturers' products and systems. Today's design engineers are busier than ever. EEPN is a timesaving information tool for using new products to solve design challenges.

Electro Technik Industries
Booth 923
Gary Zabel
12449 Enterprise Blvd.
Largo, FL 33773
Phone: 800-346-5164
Fax: 727-535-3562
www.electrotechnik.com

Enerpro Inc.
Booth 1333
5780 Thornwood Dr.
Goleta, CA 93117
Phone: 805-683-2114
Fax: 805-964-0798
www.enerpro-inc.com

Enerpro designs and manufactures firing and control circuits and assemblies for thyristor and IGBT applications. These products are for use in single- and three-phase applications in the low-voltage (to 1000 Vac) and medium-voltage (to 15 kV) ranges.

eupec Inc.
Booth 709
1050 Route 22
Lebanon, NJ 08833
Phone: 908-236-5600
Fax: 908-236-5620
www.eupec.com

eupec is a leading manufacturer of power semiconductors, setting worldwide industrial standards with product innovation focused on customer benefit and satisfaction. eupec's semiconductors are designed for applications in drive technology, traction, metal technology, energy network and power supply.

Ferroxcube USA
Booth 1018
12280 Rojas Dr., Suite F
El Paso, TX 79936
Phone: 915-599-2328
Fax: 915-599-2555
www.ferroxcube.com

Manufacturer of ferrite cores, bobbins and accessories. Wide variety of ferrite materials and products for use in power, telecom, lighting, automotive, EMI suppression and general industrial applications. Ferroxcube products are available worldwide.

Freescale Semiconductor
Booth 1108
6501 William Cannon Dr. West
Austin, TX 78735
Phone: 512-895-2000
Fax: 512-895-2652
www.freescale.com

Freescale Semiconductor designs and manufactures embedded semiconductors for the automotive, consumer, industrial, networking and wireless markets. Freescale became a publicly traded company in July 2004 after more than 50 years as part of Motorola.

Fuji Semiconductor Inc.
Booth 909
2430 N. Grandview Blvd.
Waukesha, WI 53188-6911
Phone: 262-650-0720

Fuji Semiconductor Inc. is responsible for the sale of Fuji semiconductor components to North, Central and South America. The power products include IGBTs, IPMs, PIMs and diode modules. Discrete components include general purpose, fast recovery, high voltage, schottky and power diodes, MOSFETs and MOVs. Many of the discrete components are available in surface-mount configurations.

Fujipoly America Corp.
Booth 823
900 Milk St.
Carteret, NJ 07008
Phone: 732-969-0100 x208
Fax: 732-969-3311

Fujipoly America is a globally positioned manufacturing company specializing in thermal interface materials that are used to keep electronic components cool by helping to transfer heat from the component to the heatsink. Materials range in thermal conductivity from 1 W/mK to 17 W/mK.

GMW Associates
Booth 836
955 Industrial Road
San Carlos, CA 94070
Phone: 650-802-8292
Fax: 650-802-8298
www.gmw.com

Isolated current measurement solutions. Low-cost Hall IC for on-board or bus bar sensing of motor, solenoid, relay, lamp or heater current. Precision dc current transducers to 25 kA with frequency response to over 100 kHz for current-regulated amplifiers, power analyzers, product development and test. Current transformers for current measurement and control of RF, pulsed and transient currents from 0.5 Hz to 500 MHz.

Gaia Converter Inc.
Booth 639
6611 Thimens Blvd.
St. Laurent, QC H45 1W2
Phone: 888-601-3169
Fax: 514-333-4519
www.gaia-converter.com

Gowanda Electronics
Booth 1415
One Magnetics Parkway
Gowanda, NY 14070
Phone: 716-532-2234
Fax: 716-532-2702
www.gowanda.com

Gowanda Electronics designs, manufactures and markets a large selection of inductors, coils, chokes and application specific in the world at cost-effective prices.

GrafTech International Ltd.
Booth 938
12900 Snow Road
Parma, OH 44130
Phone: 216-676-2256
Fax: 216-676-2137
www.egraf.com

Graftech International Ltd., with over 100 years of experience in the carbon and graphite industry, is the leader in developing customized natural graphite-based thermal management solutions (heatsinks/heat spreaders/heat risers) for the electronics industry's most demanding applications.

HV Components & CKE
Booth 1119
P.O. Box 848
Farmingdale, NJ 07727
Phone: 732-938-4499
Fax: 732-938-4451
www.hvca.com

Manufacturers of high-voltage and high-current rectifiers and assemblies, bridges, high-voltage multipliers, selenium surge suppressors and rectifiers, metal oxide varistors (MOV), silicon carbide varistors (SiCV) and high-voltage disk ceramic capacitors.

HVR Advanced Power Components Inc.
Booth 917
2250 Military Road
Tonawanda, NY 14150
Phone: 716-693-4700
Fax: 716-693-4774

We manufacture standard and custom-engineered surge resistors from 1 W to many kilowatts. The high-energy and voltage capacity of HVR resistors makes them ideal for the most demanding uses, like bus charging, braking, crowbar, and pulse forming in electrical transmission, ac and dc drives, pulsed power and high-voltage systems.

Henkel Corp.
Booth 1319
15350 Barrancan Parkway
Irvine, CA 92618
Phone: 626-968-6511
Fax: 626-336-0526
www.henkelelectronics.com

Henkel Loctite combines expertise with Power Devices Inc. to manufacture high-performance phase change thermal interface materials that offer exceptionally low thermal impedance for today's high-performance microprocessors for telecom and RF, power semiconductors, IGBTs and heat-dissipating components that require a dielectric interface.

High Voltage Power Solutions Inc.
Booth 1116
2542 Highlander Way
Carrollton, TX 75006
Phone: 972-248-2888
Fax: 972-381-9998
www.hvpsi.com

High Voltage Power Solutions Inc. manufactures custom high-voltage power supplies (1 kV dc to 100 kV dc), high-voltage test equipment and high-voltage specialty assemblies.

Hitachi AIC
Booth 1223
69 Milk St.
Westborough, MA 01580
Phone: 508-366-4092
Fax: 508-366-9164

Hitachi AIC manufactures aluminum electrolytic capacitors for high-voltage and high ripple applications, as well as Tantalum capacitors, film capacitors and printed circuit boards.

Holystone Enterprise Co. Ltd.
Booth 1131
Dennis O'Toole
41120 Elm St., Suite 210
Murrieta, CA 92562
Phone: 865-322-6369
www.milestone-holystone.com

ITW Paktron
Booth 1124
1205 McConville Road
Lynchburg, VA 24502
Phone: 434-239-6941 x111
Fax: 434-239-4730
www.paktron.com

ITW Paktron designs and manufactures multilayer polymer (MLP) capacitors. Ultra Low ESR designs are ideal for converters and inverters in the mid- to high-voltage range. High ripple current ratings and benign failure mode are a feature for 48-V intermediate busses. Ratings from 0.33 µf to 20 µf and from 50 Vdc to 500 Vdc.

IXYS Corp.
Booth 715
3540 Bassett St.
Santa Clara, CA 95150
Phone: 408-982-0700
Fax: 408-496-0670
www.ixys.com

IXYS Corp. designs, manufactures and sells the following part types for the industrial and general purpose markets: Power MOSFETs and IGBTs in discrete and modular packages; ultrafast recovery, schottky, gallium arsenide, silicon carbide and standard diodes in discrete packages and in modular rectifier bridges; phase control, fast turn-off, gate turn-off thyristors; rectifier bridges using diodes and thyristors; and more.

Inductors Inc.
Booth 1215
5 Technology Dr.
Irvine, CA 92618
Phone: 949-623-2460
Fax: 949-623-1984
www.inductor.com

Stocking distributor of inductive components found in various applications including medical. Offering SMD and through-hole inductors, chokes, coils, beads, transformers, toroids, antennas and EMI filters from over 80 manufacturers.

Infineon Technologies
Booth 916
1730 N. First St., Suite 16-325
San Jose, CA 95112-4508
Phone: 408-501-6384
Fax: 408-501-2424
www.infineon.com

Power Management & Supply Business Unit offers power semiconductors for ac-dc and dc-dc applications/solutions. Products include COOLMOS, OptiMOS 2, CoolSET, thinQ! and Silicon Carbide Power Diodes.

Iskra Feriti/Ceramic Magnetics
Booth 1009
16 Law Dr.
Fairfield, NJ 07004
Phone: 973-227-4222
Fax: 973-227-6735

Kanthal Globar
Booth 1222
3425 Hyde Park Blvd.
Niagara Falls, NY 14302
Phone: 716-286-7600
Fax: 716-286-7601
www.globar.com

Kanthal Globar's 113,000-sq-ft facility located in Niagara Falls, N.Y., has produced high-quality ceramic resistive components for nearly 80 years. Products manufactured or marketed from this facility include: noninductive bulk ceramic resistors, varistors and double-layer capacitors. Kanthal Globar is certified ISO 9001:2000.

Kaschke USA Inc.
Booth 1324
18200 W. McDurmott, Suite A
Irvine, CA 92614
Phone: 949-553-0469
Fax: 949-553-0476

A manufacturer of soft magnetic materials and inductive components to QS 9000/ISO TS16949 specification for automotive, lighting, power, telecommunications and industrial applications.

Kemet Corp.
Booth 1110
2835 Kemet Way
Simpsonville, SC 29681
Phone: 864-963-6300
Fax: 864-963-6444
www.kemet.com

The easy-to-buy-from company. Aluminum, ceramic and tantalum capacitors. New organic tantalums with the lowest ESR in the industry. New high-capacitance ceramic surface-mount capacitors. A new line of high-temperature ceramics and high-voltage ceramic capacitors.

Kestar Electronic Co. Ltd.
Booth 740
Shengli Road, Pengzhou Industrial Zone
Foshan/Guangdong, China 528251
Phone: 86-757-81285180
Fax: 86-757-81285189
www.kestar.com.cn

Kestar Electronic manufactures components for overvoltage protection. Products include: varistors (MOV), transient voltage surge suppressor (TVSS) and arrestors (telecommunication). Safety Approval includes ISO 9001: 2000 Certification: UL, VDE and CE .

Kunze Heatmanagement GmbH
Booth 715
Raiffeisenallee 12a
D-82041 Oberhaching
Phone: +49/89 6666 82 50
Fax.:+49/89 6666 82 456
www.heatmanagement.com

Kunze Heatmanagement is the all-in-one supplier of heat dissipation solutions for semiconductors, including thermal interfaces, semiconductor clips and heatsinks.

LeCroy Corp.
Booth 1210
700 Chestnut Ridge Road
Chestnut Ridge, NY 10977
Phone: 845-425-2000
Fax: 845-578-4472

LeCroy's PMA2 PowerMeasure analysis software brings the analysis capability, customization and ease of use of X-Stream technology to power measurement applications. Designed for use with LeCroy's WavePro 7000 series and WaveMaster digital oscilloscopes (DSOs), PMA2 provides tools that allow power-conversion engineers to quickly and easily view and analyze signals from switched-mode power converters.

LEM U.S.A. Inc.
Booth 924
6643 West Mill Road
Milwaukee, WI 53218
Phone: 414-353-0711
Fax: 414-353-0733
www.lemusa.com

LEM provides isolated current and voltage measurement solutions for power electronics, current and voltage transducers for drives, UPS, SMPs, railroad, industrial and automotive applications.

Littelfuse
Booth 736
800 E. Northwest Highway
Des Plaines, IL 60016
Phone: 847-391-0356
Fax: 847-391-0894
www.littelfuse.com

Littelfuse offers you the broadest selection of power line circuit-protection solutions available. Our fuse and PTC products provide outstanding performance in compact surface-mount and axial-leaded packages.

Lodestone Pacific
Booth 1233
4769 Wesley Dr.
Anaheim, CA 92807
Phone: 714-970-0900
Fax: 714-970-0800
www.lodestonepacific.com

Lodestone Pacific manufactures toroid mounts, headers, antistatic trays and custom bobbins, and is an authorized distributor for Fair-Rite Products, Micrometals and P.Leo Tape.

Lytron Inc.
Booth 833
55 Dragon Court
Woburn, MA 01801
Phone: 781-933-7300
Fax: 781-935-4529
www.lytron.com

Lytron, the Total Thermal Solutions company, designs and manufactures standard and custom cooling systems and components including compressor-based and thermoelectric recirculating chillers, cold plates, nonrefrigerated cooling systems, stainless steel and copper heat exchangers, and aluminum oil coolers.

MCB Tech
Booth 1137
107-111 Rue du Moulin Sarrazin
Argententeuil, France 95100
Phone: 33-00330130259760
Fax: 33-00330130259739
www.mcbindustrie.com

MMG
Booth 1225
271 Route 46 West
Fairfield, NJ 07004
Phone: 973-227-2776
Fax: 973-227-1137
www.mmgca.com

Manufacturing soft ferrites, iron powder (including MPP, High Flux, PowerFlux, Sendust), permanent magnets (including ferrite, alnico, NdFeB, SmCo) cores and accessories.

Magnetics
Booth 829
111 Zeta Dr.
Pittsburgh, PA 15238
Phone: 412.696.1300
Fax: 412.696.0333
www.mag-inc.com

Magnetics is a leader in the research, design, and manufacture of high-quality soft magnetic materials. A key supplier of the highest performance materials in the industry including; MPP, High Flux, Kool Mµ, power ferrites, high-permeability ferrites and strip-wound cores.

Methode-Cableco Technologies
Booth 930
1700 Hicks Road
Rolling Meadows, IL 60008
Phone: 847-392-3500
Fax: 847-392-9404
www.methode.com

Methode-Network Bus Products
Booth 930
1700 Hicks Road
Rolling Meadows, IL 60008
Phone: 847-392-3500
Fax: 847-392-9404
www.methode.com

Methode is a leading supplier of power distribution solutions including bus bars, laminated bus bars, flexible, braided cables and power distribution assemblies. The ISO 9001 certified organization offers complete application engineering, design and manufacturing capabilities.

Micrometals
Booth 1236
5615 E La Palma Ave.
Anaheim, CA 92807-2109
Phone: 714-970-9400
Fax: 714-970-0400
www.micrometals.com

Micrometals offers a wide selection of iron powder cores for power conversion, line filter and radio frequency applications.

Microspire
Booth 1424
16 Park d'Activities Beauvallon
Illange, France 57970
Phone: 33 0033382591759
Fax: 33 0033382510049
www.microspire.com

Multi-Contact USA
Booth 914
5560 Skylane Blvd.
Santa Rosa, CA 95403
Phone: 707-575-7575
Fax: 707-575-7373
www.multi-contact-usa.com

Advanced contact technology connectors. From design to manufacturing, Multi-Contact's connectors are produced to satisfy the highest industry standards and are ISO 9001 certified. Standard and custom designs available. Milliamps to Kiloamps, Multi-Contact has the perfect connector for any application.

NWL
Booth 1123
312 Rising Sun Road
Bordentown, NJ 08505
Phone: 609-298-7300
Fax: 609-298-1982
www.nwl.com

Manufacturer of high-voltage, high-current power-conversion equipment (transformers, inductors, reactors and power supplies).

NORWE Inc.
Booth 837
2813 Carrington St. NW
North Canton, OH 44720-0511
Phone: 330-497-8113
Fax: 330-305-0592
www.norwe.com

NORWE manufactures standard and custom-designed thermoplastic components: bobbins and accessories for ferrite cores and metric laminations; components for SMD and PLANAR technology; potting boxes and accessories for toroidal cores and electronic components; safety-class bobbins and accessories; and solder pins and tags.

Ohmite Manufacturing Co. Inc.
Booth 1132
1600 Golf Road, Suite 805
Rolling Meadows, IL 60008
Phone: 847-258-0300
Fax: 847-547-7522
www.ohmite.com

Power Resistors: Full range of resistors including wirewound, thick film and ceramic composition constructions. Innovative packaging techniques allow for a large selection of SMD and heatsinkable versions.

Okaya Electric America Inc.
Booth 1136
503 Wall St.
Valparaiso, IN 46383
Phone: 219-477-4488
Fax: 219-477-4856
www.okaya.com

Okaya Electric America designs, manufactures and markets noise suppression components for use in the electrical and electronics industry.

PSi Technologies
Booth 1330
ETI Complex, Special Economic Zone
Electronics Ave.
Taguig Metro Manil, Philippines 1633
Phone: 63-632-839-0221
Fax: 63-632-838-4648
www.psitechnologies.com

Parker-Advanced Cooling Systems
Booth 637
9200 Tyler Blvd.
Mentor, OH 44060
Phone: 440-954-8161
Fax: 440-954-8111
www.parker.com

Parker Advanced Cooling Systems offer liquid and spray evaporative cooling technology, which allows electronics manufacturers to design in ways never before possible. Parker cooling solutions offer cost-effective mechanical designs and unique system packaging, which provide superior thermal management.

Payton America
Booth 1429
6531 Park of Commerce Blvd., Suite 175
Boca Raton, FL 33487
Phone: 561-989-9585
Fax: 561-989-9587
www.paytongroup.com

World leader in the design and manufacturing of planar transformers and inductors in the United States, Israel, China, Taiwan and India. Design proposals in 24 hours and samples in two weeks.

Pearson Electronics Inc.
Booth 1032
4009 Transport St.
Palo Alto, CA 94303
Phone: 650-494-6444
Fax: 650-494-6716
www.pearsonelectronics.com

A manufacturer of wideband current monitors, used to measure submilliamp currents up to several hundred thousand amps. Current transients, harmonics and other complex wave shapes can be measured with a Pearson current monitor. A typical 3dB bandwidth is 1 Hz to 20 MHz.

Peter Parts Electronics
Booth 1015
6285 Dean Parkway
Ontario, NY 14519
Phone: 585-265-2000
Fax: 585-265-2542
www.peterparts.com

Peter Parts Electronics (PPE) is one of the leading suppliers of electronic components from Far-East sources. Established in 1986, PPE continues to bring the very best power, sight and sound products and components direct to the USA market. PPE China also has a full turnkey facility for value-added requirements.

PLITRON Manufacturing Inc.
Booth 1318
8-601 Magnetic Dr.
Toronto, ON M3J 3J2
Phone: 416-667-9914 x225
Fax: 416-667-8928
www.plitron.com

PLITRON designs and manufactures standard and custom toroidal transformers. Power transformers from 8 VA to 30 kVA. Also, CTs, inductors, medical transformers, audio transformers and magnetic assemblies. PLITRON research group's technology includes NBT (narrow bandwidth); Imin (low inrush); LoStray (low stray fields); and LoNo (low noise).

Positronic Industries Inc.
Booth 1417
423 N. Campbell Ave.
Springfield, MO 65806
Phone: 417-866-2322
Fax: 417-866-4115
www.connectpositronic.com

A vertically integrated manufacturer of high-reliability D-subminiature, power, circular and rectangular connector products and is known worldwide for developing application-specific products. Positronic offers a wide variety of power connector solutions with a wide assortment of contact variants, termination types and connector accessories.

Power Electronics Technology
Booth 629
9800 Metcalf Ave.
Overland Park, KS 66212
Phone: 913-341-1300
www.powerelectronics.com

Power Electronics Technology (PETech) magazine provides more than 39,000 power electronics engineers, designers and system integrators information on the engineering, design and integration of power electronics systems applications. Presenting practical and theoretical content in a clear and concise manner makes PETech a must-read for power electronics professionals.

Power Integrations
Booth 1022
5245 Hellyer Ave.
San Jose, CA 95138
Phone: 408-414-8821
Fax: 408-414-8921
www.powerint.com

The inventor of TOPSwitch, Power Integrations is a leading supplier of high-voltage analog integrated circuits used in ac-dc and dc-dc power conversion. The company's EcoSmart technology enables conformance to all current and proposed worldwide energy-efficiency guidelines for no-load and standby conditions.

Powerex Inc.
Booth 1014
200 E. Hillis St.
Youngwood, PA 15697
Phone: 724-925-4422
Fax: 724-925-4393
www.pwrx.com

A company that turns ideas into cost-effective, practical products, Powerex Inc. is a pioneer in high-power semiconductor applications. Powerex's continuing investment in high power has significantly advanced silicon technology and packaging, bringing to market the newest generation of semiconductor devices.

RAF Technologies Inc.
Booth 1328
200 Lexington Ave.
Deland, FL 32724
Phone: 386-736-1698
Fax: 386-736-7338
www.raftec.com

RAF Technologies has over 30 years experience in the design and manufacture of custom magnetics. We are a full-service technology company providing comprehensive design capabilities in both onshore and company-owned offshore facilities.

R-Theta Thermal Solutions Inc.
Booth 839
6220 Kestrel Road
Mississauga, ON L5T 1Y9
Phone: 905-795-0077 x247
Fax: 905-795-2508
www.r-theta.com

R-Theta Thermal Solutions is a world-class manufacturer of high-performance heatsinks. R-Theta provides air-cooled and liquid-cooled heatsinks. Our free online thermal design tool increases speed, reduces cost and provides innovative thermal design for power electronic applications.

Renco Electronics Inc.
Booth 1423
595 International Place
Rockledge, FL 32955
Phone: 321-637-1000
Fax: 321-637-1600
www.rencousa.com

Renco is a supplier of transformers and inductors — a complete magnetics source. From design to prototypes, from pilot runs to high volume.

SB Electronics Division
Booth 1118
131 S. Main St.
Barre, VT 05641
Phone: 802-476-4146
Fax: 802-476-4149
www.sbelectronics.com

SBE designs and manufactures film capacitor solutions for power electronics. We utilize innovative technology, comprehensive technical support and the shortest manufacturing lead-times in the industry.

STMicroelectronics
Booth 615
1000 E. Bell Road
Phoenix, AZ 85022
Phone: 602-485-2262
Fax: 602-485-2486
www.st.com

STMicroelectronics is a global independent semiconductor company. The company designs, develops, manufactures and markets a broad range of semiconductor integrated circuits (ICs) and discrete devices used in a wide variety of microelectronic applications.

SanRex Corp
Booth 915
50 Seaview Blvd.
Port Washington, NY 11050
Phone: 516-625-1313
Fax: 516-625-8845
www.sanrex.com

SanRex Corp. is a leading manufacturer of power semiconductors. We produce fast- and soft-recovery diodes, schottky barrier diodes, standard-recovery diodes, bridge rectifiers, thyristors and triacs in discrete packages and modules.

Semikron Inc.
Booth 1329
11 Executive Dr.
Hudson, NH 03051
Phone: 603-883-8102 x148
Fax: 603-883-8021
www.semikron.com

Sensitron Semiconductor
Booth 1128
221 W. Industry Court
Deer Park, NY 11729-4605
Phone: 631-586-7600
Fax: 631-242-9798
www.sensitron.com

Design, manufacture and testing of electronic circuits and semiconductors including power conversion products, solid-state products, high-voltage products and motor controllers. Sensitron's field of expertise includes rectification, switching, control and protection circuits.

Silicon Laboratories
Booth 1428
4635 Boston Lane
Austin, TX 78735
Phone: 512-428-1654
Fax: 512-464-9444
www.silabs.com

Silicon Laboratories is a leader in the innovation of analog-intensive, mixed-signal integrated circuit technology. Silicon Laboratories' diverse portfolio of highly integrated, patented solutions is developed by a world-class engineering team with unsurpassed expertise in mixed-signal technology.

Sleek Co. Ltd.
Booth 939
No. 350, Sec 1 Zhongtou Road
Taichung, Taiwan 00413
Phone: 886-423-332889
Fax: 886-423-396283
www.sleek.com.tw

Solid State Devices Inc. (SSDI)
Booth 1129
14701 Firestone Road
La Mirada, CA 90638
Phone: 562-404-4474
Fax: 562-404-1773
www.ssdi-power.com

SSDI is a manufacturer of power and high-voltage discrete semiconductors and modules for the defense, aerospace and space markets. Our product line includes: custom assemblies and modules, high-voltage, power, small signal, and supports DMS requirements for all military/aerospace programs.

Stellar Industries Corp.
Booth 825
50 Howe Ave.
Millbury, MA 01527
Phone: 508-865-1668
Fax: 508-865-5016
www.stellarind.com

Metalized substrates specializing in thin and thick films on Aluminum Nitride (AlN) and Beryllium Oxide (BeO) and Aluminum Oxide (Al203). Direct-bonded copper on BeO and Al203. Foundry vapor deposited AuSn on substrates.

Sunrise Electronics Inc.
Booth 1039
3333 Brea Canyon Road, Suite 202
Diamond Bar, CA 91765
Phone: 909-598-9136
Fax: 909-468-0307
www.sunriseelectronics.com

Synopsys
Booth 1109
700 East Middlefield Road, Bl
Mountain View, CA 94043
Phone: 650-584-4194
Fax: 650-584-4920
www.synopsys.com/saber

Synopsys now offers the SABER Simulator in its suite of tool sets. SABER is a mixed-signal, mixed-technology simulator that offers a powerful simulation engine, mature behavioral modeling language, extensive power library and tools that are focused on the power designer.

Sypris Test & Measurement
Booth 1322
6120 Hanging Moss Road
Orlando, FL 32807
Phone: 407-551-2718
Fax: 407-677-5765
www.sypris.com

F.W. Bell provides Hall effect and magneto-resistive current sensors, and Hall effect gaussmeters and probes.

Tabtronics Inc.
Booth 936
2854 Genesee St.
Geneseo, NY 14454
Phone: 585-243-4331
Fax: 585-243-3831
www.tabtronics.com

Tabtronics specializes in creating and commercializing advanced electromagnetic technologies. Our innovations in ultrahigh power density and high-efficiency components provide significant competitive advantage to our electronics customers. We have more than 25 years experience delivering application-specific solutions via direct manufacture of electromagnetic components.

Tamura Corporation of America
Booth 838
43352 Business Park Dr.
Temecula, CA 92590
Phone: 951-699-1270
Fax: 909-676-9482
www.tamuracorp.com

Tamura is a global manufacturer of high-quality electronic components for commercial and industrial markets for over 80 years. Our new line of Hall effect current sensors represent our commitment to the power electronics market and global production locations ensure an economic advantage to our customers.

Teamwise Ltd.
Booth 1230
12895 Hyland Circle
Boca Raton, FL 33428
Phone: 561-909-0250
Fax: 561-909-0250
www.teamwisepower.com

Tektronix Inc.
Booth 1315
Howard Vollum Industrial Park
Beaverton, OR 97077
Phone: 800-833-9200
www.tektronix.com

Tektronix is a test, measurement, and monitoring company providing measurement solutions to the communications, computer, and semiconductor industries worldwide. Tektronix enables its customers to design, build, deploy and manage global communications networks and advanced technologies.

Thermagon Inc.
Booth 1208
4707 Detroit Ave.
Cleveland, OH 44102
Phone: 216-939-2300
Fax: 216-939-2310
www.thermagon.com

Thermagon is a custom manufacturer of high-performance thermal interface materials and thermally conductive circuit board pre-pregs and laminates.

Thermshield LLC
Booth 1418
36 Country Club Road, Suite 2D-D
Gilford, NH 03249
Phone: 603-524-3714
Fax: 603-524-6602
www.thermshield.com

Thermshield designs, manufactures and supplies devices and systems for the electronics cooling industry. Thermshield is able to logistically support customers on a worldwide basis. Custom designs, standard parts and no-cost thermal analysis are Thermshield's specialties.

Tier Electronics
Booth 1218
W353 N6318 Snyder Lane
Oconomowoc, WI 53066
Phone: 262-966-7680
Fax: 262-966-7659
www.tierelectronics.com

Tier Electronics specializes in the standard and semi-custom power electronics market. Our power converters range from 50 W to megawatts. A converter or converter system can be based on existing designs, or be customized to meet OEM specifications.

Timtronics
Booth 1011
35 Old Dock Road
Yaphank, NY 11980
Phone: 631-345-6509
Fax: 631-775-4023
www.timtronics.com

Timtronics is a leading manufacturer of most advanced nonsilicon and silicon heatsink compounds with distribution worldwide. Specialty products include high thermal conductivity up to 7 W/mK, high temperature stable up 360°C and highly electrically conductive noncurable greases.

Toshiba America Electronic Components Inc.
Booth 723
19900 MacArthur Blvd., Suite 400
Irvine, CA 92618-1811
Phone: 949-623-2900
Fax: 949-474-1330
www.chips.toshiba.com

Transtek Magnetics Inc.
Booth 841
1900 W. Grant Road
Tucson, AZ 85745-1439
Phone: 520-792-4415
Fax: 520-620-0448
www.transtekmagnetics.com

OEM manufacturer of transformers, inductors and coils. Serving power, telecommunications and medical industries

Tribotek Inc.
Booth 928
30 North Ave.
Burlington, MA 01830
Phone: 781-270-0900
Fax: 781-270-0929
www.tribotek.com

Tyco Electronics Power Systems
Booth 828
Finsinger Feld 1
Ottobrunn, INT 85521
Phone: 49-89-6089-821
Fax: 49-89-6089-608
www.em.tycoelectronics.com

Tyco Electronics Power Systems is a market leader at power modules for applications such as motor drives, power supplies, welding machines and soft starters. The product portfolio includes standard IGBT PIMs, Six Packs, H-Bridges and PFC solutions covering a range from 5 A-100 A/600 V and from 5 A-150 A/1200 V in more than six different housings.

VAC Magnetics Corp.
Booth 1229
2935 Dolphin Dr., Suite 102
Elizabethtown, KY 42701
Phone: 270-769-1333
Fax: 270-765-3118
www.vaccorp.com

VAC manufactures strip-wound cores based on amorphous and nanocrystalline alloys. VAC also features wound magnetic components such as common-mode chokes for EMC filtering, closed-loop dc/ac current sensors, gate-drive transformers, current transformers, ISDN/xDSL interface component, telecommunication filter line cards, DSL CPE splitters, microfilters and powerline communications modulator interface components.

Ventronics Inc.
Booth 937
346 Monroe Ave.
Kenilworth, NJ 07033
Phone: 908-272-9262
Fax: 908-272-7630
www.ventronicsinc.com

Vishay Intertechnology
Booth 929
63 Lincoln Highway
Malvern, PA 19355
Phone: 610-644-1300
Fax: 610-889-0935
www.vishay.com

Vishay Intertechnology is one of the world's largest manufacturers of discrete semiconductors and passive electronic components. The company's components can be found in products manufactured in a very broad range of industries worldwide. Vishay has operations in 17 countries employing over 25,000 people.

Voltage Multipliers Inc.
Booth 1122
8711 W. Roosevelt
Visalia, CA 93291
Phone: 559-651-1402
Fax: 559-651-0740
www.voltagemultipliers.com

Voltage Multipliers Inc. began operations in November of 1980, initially designing and producing voltage multipliers. Our product line has expanded to include diodes, high-voltage power supplies, hybrid multipliers, surface-mount products and rectifier assemblies. From standard products to custom solutions and design support, VMI provides unsurpassed quality and product reliability. Our quality system is certified to ISO 9001.2000 and meets MIL-I-45208 standards.

Wurth Electronics Inc.
Booth 1017
91 Grant St.
Ramsey, NJ 07446
Phone: 201-785-8800
Fax: 201-785-8810
www.we-online.com

Manufacturer of passive components: chip beads, patented snap-ferrites for cable assembly, common-mode chokes, shielding material, high-frequency ceramic filters, RF components for Bluetooth. Strategic relationships with Linear Technology, National Semiconductor, Texas Instruments and Fairchild.

Yokogawa Corporation of America
Booth 1023
2 Dart Road
Newnan, GA 30265
Phone: 770-254-0400
Fax: 770-251-6427
www.yokogawa.com/us

Yokogawa will exhibit test and measurement products for precision power measurements and power-quality monitoring. A new 0.01% power analyzer and 1.5 GHz, 10 GS/s digital oscilloscope will be introduced. Portable and panel-mounted instruments, transducers and the new CW240-D Clamp-On Power Meter will be on display.

Zhuzhou Electric Locomotive Research Institute, CSR
Booth 831
Shidai Road
Zhuzhou, China 412001
Phone: 86 733 8498 389
Fax: 86 733 8431 394
www.zelri.com.cn

The company specializes in the electric drive technology of locomotives, and the applicable and engineering study of converter technology. In addition, it is engaged in the development and manufacturing of electrical control systems and power electronics devices, motors, sensors, rubber and plastics products and insulating materials.

Hide comments

Comments

  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Publish